SOUNDCORE GLOW MINI SCHNELLSTARTANLEITUNG Pdf-Herunterladen (2024)

FAQs

How do I make my Soundcore mini louder? ›

- Uninstall the Soundcore app and reinstall the Soundcore app. - Reset the speaker . - Try the speaker with another phone. Please note that currently the Soundcore app is compatible with iPhone and Android phones.

Power on your speaker. 2. Press and hold the Mode button for about 5-8 seconds. Note: Product settings are retained after resetting the device.

You can try the general troubleshooting steps and let us know if it works: 1) Upgrade the Soundcore App. 2) Forget the pairing record on your device and turn off the Bluetooth on your phone. 3) Reset the headphones.

By default, you can swipe forwards on either audio temple to turn up the volume or swipe backwards to turn the volume down. You can download the Soundcore app and customize the touch controls if you wish.

It could be because of the speaker's battery, the device connected with the speaker, the audio source, and so on. If the issue persists, please contact Soundcore customer support at service@soundcore.com for further assistance.

Normally the Bluetooth signal might be affected by obstructions, such as clothes, walls, pillars, home appliances, Wi-Fi, etc. The issue of voices cutting in and out is also affected by the battery life and Bluetooth range.

Please try the following troubleshooting steps to see if there are helpful: - Delete the pairing record and reconnect Soundcore headphones again. - When you use Soundcore headphones for a call on your computer, you may need to select them as the default playback and output device.

Put the earbuds into the charging case and close for 10 seconds, then open the charging case to try pairing again. If that doesn't work, try the following: 1- Make sure your headphones are fully charged. 2- Make sure that the volume is turned up on both the headphone and the connected device.

Having 15 hours of playtime on a single charge is impressive; I got 10 days of use before recharging. Like most speakers, the Soundcore Mini comes with aux capability to connect to other media devices.

How do I fix the Bluetooth pairing problem? ›

The pin is not supposed to be entered on the speaker but from the computer. If your Bluetooth speaker has a default pin, just enter that and it should connect. And it's typically 0000 or 1234 for such devices, if not printed on a label on the device.

To resolve most issues with Bluetooth pairing, try the following steps: Turn off Bluetooth on your device, then turn it back on. If you've previously paired your earbuds with your device, Remove / Forget the earbuds, then retry the pairing process. Restart your device.

The quietness of the Soundcore Liberty Air 2 earbuds can be caused by several factors, such as device settings, Bluetooth problems, audio jack issues, unknown reasons, software glitches, or even potential headphone damage. Fortunately, solutions are available to tackle each of these potential causes.

When music is playing, press the button on the top of the Minirg ONCE (do not press and hold). You should hear the Minirig get louder. If it gets quieter when you press the button, press it once again a few seconds later. Ensure that the volume on your device is turned up.

No, we regret to inform you that you cannot control the volume on the earbuds. You can only control the volume through your connected device. If you have additional questions, please contact Soundcore customer support at service@soundcore.com for further assistance.